1. Error Code 000021

 Remedy:

• Check if the ink tanks are installed properly.

• Make sure that the ink tanks are not empty or leaking.

• Reboot the printer to reset the system.

2. Error Code 000031

 Remedy:

• Open the printer’s rear cover and remove any jammed paper.

• Check the paper path to ensure no small pieces of paper are stuck.

• Make sure that the paper is loaded correctly, aligned, and not too thick.

3. Error Code 000074

 Remedy:

• Check the USB or network connection between the printer and the computer.

• Restart both the printer and the computer.

• Perform a print head cleaning from the printer’s maintenance menu if the issue is with a clogged print head.

4. Error Code 000144

 Remedy:

• The ink pad may need to be replaced or reset by a technician.

  Ink Maintenance Box For Epson L6160 (C13T04D198 – T04D100) (COMPATIBLE) – Garg Computers

  Ink Maintenance Box For Epson L6160 (C13T04D198) – Garg Computers

Resetting the ink pad counter may require specific software tools available from Epson’s support website.

5. Error Code 000201

Remedy:

Open the printer’s ink cartridge compartment and reseat the ink cartridge.

If the cartridge is damaged, replace it with a new one.

Check the cartridge’s contacts for dirt or ink residue and clean if necessary.

6. Error Code 000010

Remedy:

Turn the printer off and unplug it for a few minutes, then plug it back in and turn it on.

If the error persists, reinstall the printer’s drivers on your computer.

If the issue continues, contact customer support for further diagnosis.

7. Error Code 000100

Remedy:

Power off the printer and check both the front and rear sections for paper jams.

Carefully remove any jammed paper and ensure no small bits remain.

Restart the printer and check if the error is resolved.

8. Error Code 000013

 Remedy:

Perform an alignment of the print head through the printer’s maintenance menu.

If the print head is damaged, it may need to be cleaned or replaced.
Print head for Epson L6160 (FA35001 FA35011 ) – Garg Computers

9. Error Code 000123

 Remedy:

Turn off the printer, wait a few seconds, and then restart it.

If the problem persists, the printer may require professional repair.

10. Error Code 000022

 Remedy:

• Ensure that the scanner lid is properly closed.

If you are using the scanner, make sure there is no obstruction preventing it from moving.

11. Error Code 000024

 Remedy:

Check your Wi-Fi connection and ensure the printer is properly connected to your network.

Reconnect to Wi-Fi by following the printer’s Wi-Fi setup process.

12. Error Code 000200

 Remedy:

Update the printer’s firmware to the latest version.

Ensure the driver and software on your computer are up to date.

Restart both the printer and your computer