1. Error Code: 100

Error Message:

Printer not responding or cannot be connected.

Cause:

This error occurs when the printer is not properly connected to the computer or there’s an issue with the USB cable or port.

Solution:

• Ensure the USB cable is securely connected to both the printer and the computer.
• Try using a different USB cable or port.
• Restart both the computer and the printer.

2. Error Code: 101

Error Message:

1. Paper Jam

Cause:

The printer has detected a paper jam inside the feed path.

Solution:

• Open the printer cover and remove any stuck paper carefully.
• Check for any small pieces of paper that may be jammed inside.
• After clearing the jam, run a test print to ensure proper function.

3. Error Code: 102

Error Message:

Out of paper.

Cause:

The paper tray is empty, or paper is not loaded correctly.

Solution:

• Load paper into the tray.
• Ensure the paper is placed properly, aligning it with the printer’s feed mechanism.
• Press the “Resume” or “OK” button to clear the error.

4. Error Code: 103

Error Message:

Ink Cartridge Error.

 Cause:

The printer is having trouble recognizing the ink cartridge, which could be improperly installed or empty.

Solution:

• Ensure the ink cartridges are correctly seated in their slots.
• If necessary, remove and reinstall the ink cartridges.
• Check if the cartridges are empty and replace them if needed.

5. Error Code: 105

Error Message:

Paper Feed Error.

 Cause:

The printer cannot feed the paper correctly, possibly due to the paper being loaded incorrectly or too thick

Solution:

• Ensure the paper is properly aligned and not overfilled in the tray.
• Check the type of paper you’re using to ensure it is compatible with the printer.
• Remove the paper and reload it in smaller amounts to prevent jams.

6. Error Code: 120

Error Message:

Print Head Error

Cause:

The print head might be clogged or there’s a problem with the print head’s connection.

Solution

• Turn off the printer, wait for a few minutes, and then turn it back on.
• Run a cleaning cycle for the print head via the printer’s maintenance settings.
• If the problem persists, manually clean the print head using a lint-free cloth and a small amount of water or a specialized print head cleaning solution.

7. Error Code: 131

Error Message:

Print head is stuck.

Cause:

The print head is stuck in an unusual position, likely due to a blockage or hardware malfunction.

Solution:

• Turn off the printer and gently move the print head by hand to its proper position.
• If there’s a paper jam, remove the paper and clear the path.
• If the problem continues, reset the printer to its factory settings.

8. Error Code: 140

Error Message:

Carriage Error

Cause:

There is an issue with the printer’s carriage, preventing it from moving correctly.

Solution:

• Turn off the printer and inspect the carriage for any obstruction.
• Check if there are any foreign objects or paper scraps in the carriage path.
• After clearing any obstruction, restart the printer.

9. Error Code: 200

Error Message:

Power Issue (Printer not starting).

 Cause:

A problem with the printer’s power supply.

Solution:

• Make sure the power cable is securely connected to both the printer and the electrical outlet.
• Try a different power outlet or use a surge protector.
• If the printer does not start after checking the power, it might need service or a replacement power adapter.
  Original Ink Damper Adapter Assy for Epson L100 (1624320) – Garg Computers

10. Error Code: 300

Error Message:

Firmware or Software Issue.

Cause:

A malfunction or mismatch in the printer’s firmware or software.

Solution:

• Ensure that the printer drivers and software are updated to the latest version.
• Uninstall and reinstall the printer drivers on your computer.
• You can also perform a firmware reset by checking the printer’s manual or contacting support.

General Troubleshooting Tips:

• Reset the printer: Turn off the printer, unplug it for 10-15 seconds, then plug it back in and turn it on.
• Check for loose connections: Ensure all cables are securely connected and not damaged.
• Perform Maintenance: Use the printer’s built-in maintenance tools like print head cleaning or alignment.Head Cleaning Solution For Epson Hp Canon Inkjet Printers (50ml) WITH DROPER – Garg Computers